IBS - Heatshrinks








End Caps
Two-Way LV Cable Breakouts
Three-Way LV Cable Breakout
Four-Way LV Cable Breakout
Heatshrink Tubing & Kits
Heat Shrinkable LV Insulating Tubes
Corrosion Protection Tube
Wraparound Joint Closure & Repair Kits
Termination & Joint For 3C 11kV PILC Belted Cable
Transition Joint For 1C & 3C HT XLPE to PILC Cables
Termination & Joint For 3C HT XLPE Cables
Termination & Joint For 3C HT XLPE Cables (DW)
Termination & Joint For 3C HT PILC Screened Cablrs
Termination & Joints For 1C HT XLPE Cables
Termination & Joint For 1C HT XLPE Cables (DW-DGN)
Termination & Joint For 1C HT PILC Cables
Conductive End Cap
Three-Way Semi-conductive Cable Breakouts
Three-Way Non Tracking Cable Breakouts
Heak Shrinkable Insulating Tube
Heat Shrinkable Non Tracking Tubes
Heat Shrinkable Semi-Conductive Tubings
Heat Shrinkable Stress Control Tubing
Inline and Right-Angle Boots
Rain Sheds
Strain Relief Sheds
Composite Support Insulators
Pipe Wrap Corrosion Protection

End Caps

All dimensions are in mmDrawing depicts typical dimensionsE – as suppliedS – after free recoveryD,d – internal diameter without adhesive coatingLC – Length as per requirement

Heat shrinkable cable end caps are used to seal the ends of all type of cables and protect from ingress of water/moisture. The caps are made from thermally stabilised cross linked polymeric material. The caps are internally coated with hot melt adhesive. End caps are available with valves fitted.

Size	Ordering RefOrdering Ref	Dia D	B	A	LC	T
E	S	E	S	E	S	S
Min.	Max.	Min.	Min.	Min.	%	± 20%
14-4	SECT 144-40	14	4.5	45	40	15	±10	1.2
SECT 144-60	14	4.5	65	60	25	±10	1.2
16-6	SECT 166-45	16	4.5	50	45	15	±10	1.2
24-8	SECT 248-45	24	8	50	45	15	±10	3
SECT 248-65	24	8	70	65	20	±10	3
36-15	SECT 3615-105	35	16	110	105	35	±10	4
SECT 3615-160	35	16	170	160	50	±10	4
40-17	SECT 4017-105	40	17	110	105	35	±10	4
SECT 4017-160	40	17	170	160	50	±10	4
55-25	SECT 5525-105	55	25	110	105	35	±10	4.2
SECT 5525-160	55	25	170	160	70	±10	4.2
62-25	SECT 6225-105	62	25	110	105	35	±10	4.2
SECT 6225-160	62	25	170	160	70	±10	4.2
75-34	SECT 7534-105	75	34	120	105	100	±10	3.5
SECT 7534-190	75	34	220	190	100	±10	3.5
105-45	SECT 10545-105	105	45	120	105	70	±10	3.5
SECT 10545-160	105	45	175	160	70	±10	3.5

Characteristic	Value	Test Method
Physical Properties
Specific gravity	1.1 ± 0.2	ASTM D-1505
Water absorption	1% (max)	ASTM D-570 /ISO 62
Tensile strength	10 N/sqmm (min)	ASTM D-412 /ISO 37
Ultimate elongation	300% (min)	ASTM D-412 /ISO 37
Hardness	45 ± 3 shore D	ASTM D-2240
Thermal Ageing Tests (120 °C for 500hrs)
Tensile strength	8 N/sqmm (min)	ASTM D-412 /ISO 37
Ultimate elongation	200% (min)	ASTM D-412 /ISO 37
Electrical Properties
Volume resistivity	1x10¹² Ohm-cm (min)	ASTM D-257 /IEC 93
Dielectric strength	10kV/mm (min)	ASTM D-149 /IEC 243
Dielectric constant	5 (max)	ASTM D-150 /IEC 250

	Home		About Us		Contact Us
		+44 (0)1702 420520		sales@ibsconnect.com