IBS - Heatshrinks








End Caps
Two-Way LV Cable Breakouts
Three-Way LV Cable Breakout
Four-Way LV Cable Breakout
Heatshrink Tubing & Kits
Heat Shrinkable LV Insulating Tubes
Corrosion Protection Tube
Wraparound Joint Closure & Repair Kits
Termination & Joint For 3C 11kV PILC Belted Cable
Transition Joint For 1C & 3C HT XLPE to PILC Cables
Termination & Joint For 3C HT XLPE Cables
Termination & Joint For 3C HT XLPE Cables (DW)
Termination & Joint For 3C HT PILC Screened Cablrs
Termination & Joints For 1C HT XLPE Cables
Termination & Joint For 1C HT XLPE Cables (DW-DGN)
Termination & Joint For 1C HT PILC Cables
Conductive End Cap
Three-Way Semi-conductive Cable Breakouts
Three-Way Non Tracking Cable Breakouts
Heak Shrinkable Insulating Tube
Heat Shrinkable Non Tracking Tubes
Heat Shrinkable Semi-Conductive Tubings
Heat Shrinkable Stress Control Tubing
Inline and Right-Angle Boots
Rain Sheds
Strain Relief Sheds
Composite Support Insulators
Pipe Wrap Corrosion Protection

Four-Way LV Cable Breakout

All dimensions are in mmDrawing depicts typical dimensionsE – as suppliedS – after free recoveryD,d – internal diameter without adhesive coating

Heat Shrinkable 4-way Cable Breakouts provide environmental seal to the crutch of 3 / and 4 core Plastic and Paper insulated cables rated up to 1.1kV. The Breakouts are made from thermally stabilised cross linked polymeric material.

The Breakouts are internally coated with mastic / hot melt adhesive.

SIZE (Part No.)	Dia D	Dia d	P	F	TB	TF
E	S	E	S	E	S	E	S	S
Min.	Max.	Min.	Max.	±20%	±20%
EB 4 28 09	28	09	8	2	55 - 58	77 - 80	15 - 17	2.0	1.5
EB 4 35 15	35	15	13	4	80 - 83	102 - 105	20 - 23	2.2	1.8
EB 4 47 23	47	23	20	8	130 - 133	167 - 170	35 - 38	4.0	3.0
EB 4 60 25	60	25	25	8	150 - 153	186 - 194	32 - 35	4.2	3.0
EB 4 78 36	78	36	30	12	170 - 173	218 - 222	42 - 44	3.9	3.0
EB 4 95 36	95	36	35	14	170 - 173	220 - 222	49 - 53	3.5	3.0

Characteristic	Value	Test Method
Physical Properties
Density	1.05±0.2 g/cm³	ASTM D-1505/D=M/V
Hardness	45±3 shore D	ASTM D-2240
Tensile strength	13 N/sqmm (min)	ASTM D-412 /ISO 37
Ultimate elongation	400% (min)	ASTM D-412 /ISO 37
Water absorption	0.15% (max)	ASTM D-570 /ISO 62
Longitudinal Shrinkage	10% (max)	-
Longitudinal Shrinkage	> 3 : 1	-
Thermal Tests
Flammbility	Self extinguishing	ASTM D-876
Low temperature flexibility	300% (min)	ASTM D-2671C
Operating temperature range	- 35 C, +135 C	Din 53 466
Thermal Ageing Tests (120 C for 500hrs)
Tensile strength	12 N/sqmm (min)	ASTM D-412 /ISO 37
Ultimate elongation	300% (min)	ASTM D-412 /ISO 37
Electrical Properties
Volume resistivity	1x10¹² Ohm-cm (min)	ASTM D-257 /IEC 93
Dielectric strength	10kV/mm (min)	ASTM D-149 /IEC 243
Dielectric constant	5 (max)	ASTM D-150 /IEC 250
Chemical Properties
Corrosion	None	ASTM D-2671
Resistance to fungus & decay	Rate 1	ISO 846 method A

	Home		About Us		Contact Us
		+44 (0)1702 420520		sales@ibsconnect.com