OJK Features

The 32R closure can accommodate cables up to 96 fibres

Uses 16-fibre splice trays

Heatshrink cable ports ensure high quality environmental seal

The oval port uses a branch plug

Spur cable ports are made with auxiliary sealing glands

Supplied with ready access clamp

Configurations

The 5-port base has one oval port and 4 auxiliary ports with screw-in blanks fitted. The oval port is either for two spliced cables or a looped cable where only the fibres that need to be accessed are cut and spliced to a spur cable.

The 4-port base has 4 auxiliary ports that are sealed with factory fitted threaded blanks. Cables with a heat shrink auxiliary sealing gland fitted, can then be screwed into the closure base. The 4-port base will not accommodate looped cables.

Optical Joint Kits

OJK 3000 series are supplied with all the components to facilitate installation, including installation instructions for both closure and organiser.

Closure Contents

Top, base, ‘O’ ring, re-sealableclamp, oval port seal, 4 M32 auxiliary glands (4-port kits only) mounting bracket and pin, desiccant pack, cleaning sachets, abrasive strip, protective foil, installation instructions.

Fibre Splice Organiser Contents

Trays with hinges, latches and splice holders,cable ties for tube to tray retention, warning label, tray cover, tubedfibre storage tray, robust stainless steel chassis, numbering collets.

Organiser Features

Fibre can be routed across trays

Industry standard 35mm bending radius mandrel

Permits back splicing

Excess fibre storage with no need to pre-cut

Supplied as standard with 2 x 8 fibre splice holders