IBS - Heatshrinks








End Caps
Two-Way LV Cable Breakouts
Three-Way LV Cable Breakout
Four-Way LV Cable Breakout
Heatshrink Tubing & Kits
Heat Shrinkable LV Insulating Tubes
Corrosion Protection Tube
Wraparound Joint Closure & Repair Kits
Termination & Joint For 3C 11kV PILC Belted Cable
Transition Joint For 1C & 3C HT XLPE to PILC Cables
Termination & Joint For 3C HT XLPE Cables
Termination & Joint For 3C HT XLPE Cables (DW)
Termination & Joint For 3C HT PILC Screened Cablrs
Termination & Joints For 1C HT XLPE Cables
Termination & Joint For 1C HT XLPE Cables (DW-DGN)
Termination & Joint For 1C HT PILC Cables
Conductive End Cap
Three-Way Semi-conductive Cable Breakouts
Three-Way Non Tracking Cable Breakouts
Heak Shrinkable Insulating Tube
Heat Shrinkable Non Tracking Tubes
Heat Shrinkable Semi-Conductive Tubings
Heat Shrinkable Stress Control Tubing
Inline and Right-Angle Boots
Rain Sheds
Strain Relief Sheds
Composite Support Insulators
Pipe Wrap Corrosion Protection

Three-Way LV Cable Breakout

All dimensions are in mmDrawing depicts typical dimensionsE - as suppliedS - after free recoveryD, d - internal diameter without adhesive coating

Heat Shrinkable 3-way Cable Breakouts provide environmental seal to the crutch of 3 core Plastic and Paper insulated cables rated up to 1.1kV. The Breakouts are made from thermally stabilised cross linked polymeric material.

The Breakouts are internally coated with mastic / hot melt adhesive.

SIZE (Part No.)	Dia D	Dia d	P	F	TB	TF
E	S	E	S	E	S	E	S	S
Min.	Max.	Min.	Max.	±20%	±20%
EB 3 25 09	25	09	9	3	50 - 53	70 - 72	15 - 17	2.5	1.8
EB 3 35 15	35	15	13	4	85 - 88	100 - 102	20 - 23	2.5	1.8
EB 3 55 23	55	23	25	8	130 - 133	165 - 177	35 - 37	3.3	2.5
EB 3 75 28	75	28	35	13	170 - 173	211 - 215	43 - 47	3.5	3.0
EB 3 110 35	110	35	50	17	180 - 183	210 - 220	50 - 55	4.0	3.5

Characteristic	Value	Test Method
Physical Properties
Density	1.05±0.2 g/cm³	ASTM D-1505/D=M/V
Hardness	45±3 shore D	ASTM D-2240
Tensile strength	13 N/sqmm (min)	ASTM D-412 /ISO 37
Ultimate elongation	400% (min)	ASTM D-412 /ISO 37
Water absorption	0.15% (max)	ASTM D-570 /ISO 62
Longitudinal Shrinkage	10% (max)	-
Longitudinal Shrinkage	Š3 : 1	-
Thermal Tests
Flammbility	Self estinguishing	ASTM D-876
Low temperature flexibility	300% (min)	ASTM D-2671C
Operating temperature range	- 35°C.+135°C	Din 53 466
Thermal Ageing Tests (120 C for 500hrs)
Tensile strength	12 N/sqmm (min)	ASTM D-412 /ISO 37
Ultimate elongation	300% (min)	ASTM D-412 /ISO 37
Electrical Properties
Volume resistivity	1x10¹² Ohm-cm (min)	ASTM D-257 /IEC 93
Dielectric strength	10kV/mm (min)	ASTM D-149 /IEC 243
Dielectric constant	5 (max)	ASTM D-150 /IEC 250
Chemical Properties
Corrosion	None	ASTM D-2671
Resistance to fungus & decay	Rate 1	ISO 846 method A

	Home		About Us		Contact Us
		+44 (0)1702 420520		sales@ibsconnect.com