IBS - Heatshrinks








End Caps
Two-Way LV Cable Breakouts
Three-Way LV Cable Breakout
Four-Way LV Cable Breakout
Heatshrink Tubing & Kits
Heat Shrinkable LV Insulating Tubes
Corrosion Protection Tube
Wraparound Joint Closure & Repair Kits
Termination & Joint For 3C 11kV PILC Belted Cable
Transition Joint For 1C & 3C HT XLPE to PILC Cables
Termination & Joint For 3C HT XLPE Cables
Termination & Joint For 3C HT XLPE Cables (DW)
Termination & Joint For 3C HT PILC Screened Cablrs
Termination & Joints For 1C HT XLPE Cables
Termination & Joint For 1C HT XLPE Cables (DW-DGN)
Termination & Joint For 1C HT PILC Cables
Conductive End Cap
Three-Way Semi-conductive Cable Breakouts
Three-Way Non Tracking Cable Breakouts
Heak Shrinkable Insulating Tube
Heat Shrinkable Non Tracking Tubes
Heat Shrinkable Semi-Conductive Tubings
Heat Shrinkable Stress Control Tubing
Inline and Right-Angle Boots
Rain Sheds
Strain Relief Sheds
Composite Support Insulators
Pipe Wrap Corrosion Protection

Two-Way LV Cable Breakouts

All dimensions are in mmDrawing depicts typical dimensionsE - as suppliedS - after free recoveryD, d - internal diameter without adhesive coating

Heat Shrinkable 2-way Cable Breakouts provide environmental seal to the crutch of 2 core Plastic and Paper insulated cables rated up to 1.1kV. The Breakouts are made from thermally stabilised cross linked polymeric material.

The Breakouts are internally coated with hot melt adhesive.

SIZE (Part No.)	Dia D	Dia d	P	F	TB	TF
E	S	E	S	E	S	E	S	S
Min.	Max.	Min.	Max.	±20%	±20%
EB 2 30 10	30	10	12	4	65 - 68	87 - 90	15 - 17	1.5	1.0
EB 2 50 24	50	24	21	7	85 - 88	118 - 121	25 - 27	3.0	2.5

Characteristic	Value	Test Method
Physical Properties
Density	1.05±0.2 g/cm³	ASTM D-1505/D=M/V
Hardness	45±3 shore D	ASTM D-2240
Tensile strength	13 N/sqmm (min)	ASTM D-412 /ISO 37
Ultimate elongation	400% (min)	ASTM D-412 /ISO 37
Water absorption	0.15% (max)	ASTM D-570 /ISO 62
Longitudinal Shrinkage	10% (max)	-
Longitudinal Shrinkage	Š3 : 1	-
Thermal Tests
Flammbility	Self estinguishing	ASTM D-876
Low temperature flexibility	300% (min)	ASTM D-2671C
Operating temperature range	- 35°C.+135°C	Din 53 466
Thermal Ageing Tests (120 C for 500hrs)
Tensile strength	12 N/sqmm (min)	ASTM D-412 /ISO 37
Ultimate elongation	300% (min)	ASTM D-412 /ISO 37
Electrical Properties
Volume resistivity	1x10¹² Ohm-cm (min)	ASTM D-257 /IEC 93
Dielectric strength	10kV/mm (min)	ASTM D-149 /IEC 243
Dielectric constant	5 (max)	ASTM D-150 /IEC 250
Chemical Properties
Corrosion	None	ASTM D-2671
Resistance to fungus & decay	Rate 1	ISO 846 method A

	Home		About Us		Contact Us
		+44 (0)1702 420520		sales@ibsconnect.com